|
上海辉立焊材有限公司 
| 联系人：焦月辉 先生 (经理) |
 |
| 电 话：021-51021330 |
|
| 手 机：18701933973 |
|
 |
|
 |
|
| 供应瑞典山特维克vik 25.10.4.LR/E2594-16不锈钢焊条 |
品牌：瑞典山特维克
Sandvik 25.10.4.LR (Covered electrodes)
Datasheet updated 2014-08-19 16:17:14 (supersedes all previous editions)
Sandvik 25.10.4.LR is a covered electrode with rutile-basic coating and about 105% metal recovery used for welding of super-duplex (austenitic-ferritic) stainless steels of UNS S32750/S32760 type (e.g. Sandvik SAF 2507 and Zeron* 100). The weld metal has especially good properties under severely corrosive conditions. Examples of properties are:
Excellent stress corrosion cracking resistance in chloride-containing media
Excellent pitting resistance
High resistance to general corrosion
High resistance to erosion corrosion and corrosion fatigue
Spray transfer gives a bead with a finely rippled surface. There is little spatter and very good slag removal.
Standards
AWS E2594-16
EN number E 25 9 4 N L
Product standards
EN ISO 1600
ASME/AWS SFA5.4
Approvals
DNV, TüV
Chemical composition - all-weld metal
The following data is valid for non heat treated all-weld metal.
CSiMnPSCrNiMoNChemical composition, wt%
0.03 0.5 0.7 ≤0.030 ≤0.025 25 9.5 4.0 0.25
Microstructure - all-weld metal
Austenitic-ferritic (Duplex) microstructure with approximately 40 FN calculated from the WRC 92 diagram |
 |
| |
|
|
 |
|
|
免责声明： 以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，企业录对此不承担任何责任。如有侵犯您的权益，请来信通知删除。